Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PETG CR-5511 CR CHEM-MAT
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | CR CHEM-MAT/CR-5511 |
---|---|---|---|
Hardness (Rockwell R) | ASTM D785 | 119 |
thermal performance | Test Condition | Test Method | CR CHEM-MAT/CR-5511 |
---|---|---|---|
Hot deformation temperature | 0.45MPa | ASTM D648 | 76.2 °C |
1.8MPa | ASTM D648 | 66.2 °C | |
Vicat softening temperature | 10N | ASTM D1525 | 79.1 °C |
mechanical properties | Test Condition | Test Method | CR CHEM-MAT/CR-5511 |
---|---|---|---|
Bending modulus 1.27mm/min | ASTM D790 | 2090 Mpa | |
bending strength | 1.27mm/min | ASTM D790 | 70.8 Mpa |
elongation | Yield,50mm/min | ASTM D638 | 5.1 % |
Elongation at Break | 50mm/min | ASTM D638 | 88 % |
Impact strength of cantilever beam gap | ASTM D256 | 51 J/m | |
tensile strength | Yield,50mmzmin | ASTM D638 | 51 Mpa |
Break50mm/min | ASTM D638 | 29.2 Mpa |
Electrical performance | Test Condition | Test Method | CR CHEM-MAT/CR-5511 |
---|---|---|---|
Dielectric constant | ASTM DI50 | 2.32 | |
ASTM D150 | 2.13 | ||
Dielectric strength | 2kV/s, 短期 | ASTM D149 | 15.83 KV/mm |
Dissipation factor | ASTM DI 50 | 0.0246 | |
Surface resistivity | ASTM D257 | 10500000000000000 Ω | |
Volume resistivity | ASTM D257 | 1230000000000000 Ω.cm |
Physical properties | Test Condition | Test Method | CR CHEM-MAT/CR-5511 |
---|---|---|---|
Water absorption rate | 24hr在水里 | ASTM D570 | 0.15 % |
optical performance | Test Condition | Test Method | CR CHEM-MAT/CR-5511 |
---|---|---|---|
transmissivity | ASTM DI 003 | 90.2 % | |
turbidity | ASTM D1003 | 1.1 % |