Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PSU+PC RTP 4300 S-1010 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 4300 S-1010 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 430 J/m |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 64 J/m |
| Supplementary Information | Test Condition | Test Method | RTP US/RTP 4300 S-1010 |
|---|---|---|---|
| Primary Additive | 10 % |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 4300 S-1010 |
|---|---|---|---|
| tensile strength | ASTM D638 | 82.7 MPa | |
| elongation | 屈服 | ASTM D638 | 7.0 % |
| Flexural modulus | ASTM D790 | 3450 MPa | |
| Tensile modulus | ASTM D638 | 3790 MPa | |
| bending strength | ASTM D790 | 131 MPa |
| flammability | Test Condition | Test Method | RTP US/RTP 4300 S-1010 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | V-0 |
| 1.5mm | UL 94 | V-1 |
| physical property | Test Condition | Test Method | RTP US/RTP 4300 S-1010 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.30to0.50 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.20 % |
| water content | 0.020 % | ||
| density | ASTM D792 | 1.29 g/cm³ |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 4300 S-1010 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 154 °C |
Contact Us
Get App
Top