Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 A RV 300RKC RADIC ITALY
Radiflam®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodRADIC ITALY/A RV 300RKC
Charpy Notched Impact Strength23°CISO 179/1eA13 kJ/m²
-30°CISO 179/1eA11 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU90 kJ/m²
-30°CISO 179/1eU75 kJ/m²
Mechanical propertiesTest ConditionTest MethodRADIC ITALY/A RV 300RKC
Tensile stress断裂ISO 527-2/1A/5180 Mpa
Tensile modulusISO 527-2/1A/19500 Mpa
Flexural ModulusISO 1788500 Mpa
Bending stress 4ISO 178275 Mpa
Tensile strain断裂ISO 527-2/1A/53.9 %
Electrical performanceTest ConditionTest MethodRADIC ITALY/A RV 300RKC
Volume resistivity 6IEC 600931.0E+15 ohms·cm
Surface resistivity 6IEC 600931.0E+12 ohms
CTI解决方案 AIEC 60112600 V
flammabilityTest ConditionTest MethodRADIC ITALY/A RV 300RKC
Burning wire flammability index2.0 mmIEC 60695-2-12700 °C
UL flame retardant rating0.8 mmUL 94HB
flammabilityFMVSS 3020 mm/min
physical property Test ConditionTest MethodRADIC ITALY/A RV 300RKC
Water absorption rate饱和, 23°C, 2.00 mmISO 627.0 %
平衡, 23°C, 2.00 mm, 50% RHISO 621.7 %
Shrinkage rate 3横向流量ISO 294-41.0 %
densityISO 11831.35 g/cm³
Shrinkage rate 3流量ISO 294-40.30 %
Thermal performanceTest ConditionTest MethodRADIC ITALY/A RV 300RKC
Melting temperature 5ISO 11357-3260 °C
Heat Deflection Temperature1.8 MPa, 未退火ISO 75-2/Af235 °C
vicatISO 306/B50245 °C
Heat Deflection Temperature0.45 MPa, 未退火ISO 75-2/Bf250 °C
injectionTest ConditionTest MethodRADIC ITALY/A RV 300RKC
Suggested maximum moisture content0.15 %
Drying time - hot air dryer2.0 到 4.0 hr
Processing (melt) temperature280 到 300 °C
injection speed中等偏快
Dew Point - Hot Air Drying Machine-20 °C
Temperature80 到 100 °C
Drying temperature - hot air dryer80 °C

Contact Us

Get App

Top