Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PTFE 25FR Arlon-MED
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | Arlon-MED/25FR |
|---|---|---|---|
| Total Mass Loss | 125°C | >0.24 % | |
| WaterVapor-Recovered | 0.070 % |
| film | Test Condition | Test Method | Arlon-MED/25FR |
|---|---|---|---|
| Peel strength | Internal Method | 875.6 N/m | |
| tensile strength | Yield | ASTM D882A | 96.5 MPa |
| thermal performance | Test Condition | Test Method | Arlon-MED/25FR |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD:--6 | Internal Method | 1.6E-05 cm/cm/°C |
| MD:--7 | Internal Method | 1.8E-05 cm/cm/°C | |
| MD:-10to140°C9 | Internal Method | 5E-05 cm/cm/°C | |
| MD:--8 | Internal Method | 5.9E-05 cm/cm/°C | |
| thermal conductivity | 100°C | ASTME1225 | 0.45 W/m/K |
| mechanical properties | Test Condition | Test Method | Arlon-MED/25FR |
|---|---|---|---|
| bending strength | 23°C | ASTM D790A | 241 MPa |
| Electrical performance | Test Condition | Test Method | Arlon-MED/25FR |
|---|---|---|---|
| Dielectric constant | 23°C,10.0GHz | Internal Method | 3.58 |
| Dissipation factor | 10.0GHz | Internal Method | 3.5E-03 |
| Surface resistivity | 0.305mm | Internal Method | 8.9E+08 ohms |
| Volume resistivity | 0.305mm | Internal Method | 4.2E+08 ohms·cm |
| Physical properties | Test Condition | Test Method | Arlon-MED/25FR |
|---|---|---|---|
| density | ASTM D792A | 1.80 g/cm³ | |
| Volatile compounds | 0.0 % | ||
| Water absorption rate | 23°C,24hr | Internal Method | 0.090 % |
| flammability | Test Condition | Test Method | Arlon-MED/25FR |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |