Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 ADDINYL A2 ZV30 ADDIPLAST GERMANY
ADDINYL®
Automotive sector、Engine hood parts、Application in the automo、Parts under the hood of a
heat-resisting、Aging resistance、High rigidity、Filler: Glass fiber reinf、30% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2 ZV30 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | kJ/m² | 55 |
| hardness | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2 ZV30 |
|---|---|---|---|
| Shore hardness | 邵氏D | 85 |
| Mechanical properties | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2 ZV30 |
|---|---|---|---|
| Flexural modulus | 8200 MPa | ||
| tensile strength | 断裂 | 180 MPa | |
| Tensile strain | 断裂 | % | 3.0 5.0 |
| Electrical performance | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2 ZV30 |
|---|---|---|---|
| dielectric strength | kV/mm | 35 | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | V | -- |
| Volume resistivity | ohms·cm | 1E+15 1E+13 |
| Thermal performance | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2 ZV30 |
|---|---|---|---|
| melting temperature | °C | 260 -- | |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 3E-05 -- |
| Heat distortion temperature | 1.8MPa,未退火，HDT | °C | 255 -- |
Contact Us
Get App
Top