plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 158 NC010Z DUPONT USA
Zytel® 
electrical equipment,Fitness equipment
High temperature resistan,Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodDUPONT USA/158 NC010Z
Glass transition temperatureISO 11357-260.0 °C
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B135 °C
1.8MPa,UnannealedISO 75-2/A62.0 °C
Linear coefficient of thermal expansionTD:-40to23°CISO 11359-29E-05 cm/cm/°C
MD:--ISO 11359-21.2E-04 cm/cm/°C
MD:-40to23°CISO 11359-29E-05 cm/cm/°C
MD:55to160°CISO 11359-21.7E-04 cm/cm/°C
TD:--ISO 11359-21.2E-04 cm/cm/°C
TD:55to160°CISO 11359-21.8E-04 cm/cm/°C
Melting temperatureISO 11357-3218 °C
mechanical propertiesTest ConditionTest MethodDUPONT USA/158 NC010Z
Bending modulusISO 1782050 Mpa
Nominal tensile fracture strainISO 527-235 %
Tensile modulusISO 527-22400 Mpa
Tensile strainYieldISO 527-24.5 %
tensile strengthYieldISO 527-262.0 Mpa
Electrical performanceTest ConditionTest MethodDUPONT USA/158 NC010Z
Dielectric strengthIEC 60243-136 KV/mm
Dissipation factor1MHzIEC 602500.016
100HzIEC 602500.014
Relative permittivity100HzIEC 602503.60
1MHzIEC 602503.20
Surface resistivityIEC 60093-- ohms
Volume resistivityIEC 60093>1.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodDUPONT USA/158 NC010Z
MediumDensity0.900 g/cm³
Shrinkage rateMDISO 294-41.3 %
MD:3.20mm1.1 %
TDISO 294-41.4 %
SpecificHeatCapacity of Melt2800 J/kg/°C
StickinessISO 307120 cm³/g
ThermalConductivityofMelt0.19 W/m/K
Water absorption rateEquilibrium,23°C,2.00mm,50%RHISO 621.3 %
Saturation,23°C,2.00mmISO 623.0 %
impact performanceTest ConditionTest MethodDUPONT USA/158 NC010Z
Impact strength of simply supported beam without notch-30°CISO 179/1eUNoBreak
23°CISO 179/1eUNoBreak
flammabilityTest ConditionTest MethodDUPONT USA/158 NC010Z
Burning rate1.00mmISO 3795<100 mm/min
Extreme Oxygen IndexISO 4589-225 %
FMVSS flammabilityFMVSS302B
UL flame retardant rating0.9mmIEC 60695-11-10,-20HB
1.5mmIEC 60695-11-10,-20HB
1.5mmUL 94HB
0.9mmUL 94HB