Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PMMA Optix® CA-51 KC PLASKOLITE USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | PLASKOLITE USA/Optix® CA-51 KC |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 16 J/m | |
| GardnerImpact | 3.18mm | ASTM D5420 | 0.226 J |
| hardness | Test Condition | Test Method | PLASKOLITE USA/Optix® CA-51 KC |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 80 |
| Mechanical properties | Test Condition | Test Method | PLASKOLITE USA/Optix® CA-51 KC |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 2.6 % |
| tensile strength | ASTM D638 | 53.8 MPa | |
| Flexural modulus | ASTM D790 | 2980 MPa | |
| Tensile modulus | ASTM D638 | 2830 MPa | |
| bending strength | ASTM D790 | 86.9 MPa |
| physical property | Test Condition | Test Method | PLASKOLITE USA/Optix® CA-51 KC |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.20to0.60 % |
| melt mass-flow rate | ASTM D1238 | 20 g/10min |
| Thermal performance | Test Condition | Test Method | PLASKOLITE USA/Optix® CA-51 KC |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 75.6 °C |
| vicat | ASTM D1525 | 93.9 °C | |
| Linear coefficient of thermal expansion | MD：-30到30°C | ASTM D696 | 6E-05 cm/cm/°C |
Contact Us
Get App
Top