Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 1-1111 VP LEHVOSS GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | LEHVOSS GERMANY/1-1111 VP |
|---|---|---|---|
| Linear coefficient of thermal expansion | MDMD | ISO 11359-2 | 0.000018 1/℃ |
| Maximum operating temperature | 160 °C | ||
| thermal conductivity | DIN 52612 | 0.43 W/m/K |
| mechanical properties | Test Condition | Test Method | LEHVOSS GERMANY/1-1111 VP |
|---|---|---|---|
| Bending modulus | 23℃23°C | ISO 178 | 10000 Mpa |
| bending strength | 4% Strain,23℃Strain4.0%,23°C | ISO 178 | 285 Mpa |
| Tensile strain | Break,23℃23°C | ISO 527-2 | 3 % |
| tensile strength | 23℃23°C | ISO 527-2 | 190 Mpa |
| Electrical performance | Test Condition | Test Method | LEHVOSS GERMANY/1-1111 VP |
|---|---|---|---|
| Dissipation factor | 体积电阻体积电阻 | 100000 Ω.cm | |
| 表面电阻表面电阻 | 1000 Ω.cm |
| Physical properties | Test Condition | Test Method | LEHVOSS GERMANY/1-1111 VP |
|---|---|---|---|
| density | ISO 1183 | 1.26 g/cm³ | |
| Shrinkage rate | MDMD | ISO 294-4 | 0.2 % |
| TDTD | ISO 294-4 | 0.5 % | |
| Water absorption rate | 23℃,24hr(23°C, 24 hr) | ISO 62 | <=1.0 % |
| impact performance | Test Condition | Test Method | LEHVOSS GERMANY/1-1111 VP |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179-1eA | 11 kJ/m² | |
| Impact strength of simply supported beam without notch | 23℃23°C | ISO 179/1eU | 33 kJ/m² |