PPA PA GF 50 BK PPA vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PPA AKRO-PLASTIC GERMANY PA GF 50 BK

Injection grade

US$ 4,630 / MT

FOB Shenzhen Port

mechanical properties	Test Condition	Test Method	AKRO-PLASTIC GERMANY/PA GF 50 BK
bending strength		ISO 178	380 Mpa
Tensile strain	Break	ISO 527-2/5	3.0 %
Tensile modulus		ISO 527-2/1	17500 Mpa
tensile strength	Break	ISO 527-2/5	250 Mpa
Bending modulus		ISO 178	16400 Mpa
thermal performance	Test Condition	Test Method	AKRO-PLASTIC GERMANY/PA GF 50 BK
Linear coefficient of thermal expansion	Flow : 23 to 80°C	ISO 11359-2	1.5E-5 cm/cm/°C
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	245 °C
Hot deformation temperature		1.8 MPa, Unannealed	ISO 75-2/A	225 °C
Temperature index - at 50% loss of tensile strength			110 to 130 °C
Linear coefficient of thermal expansion	Across Flow : 23 to 80°C	ISO 11359-2	6.5E-5 cm/cm/°C
Melting temperature		DIN EN 11357-1	255 °C
Vicat softening temperature		ISO 306/B50	242 °C
Physical properties	Test Condition	Test Method	AKRO-PLASTIC GERMANY/PA GF 50 BK
Melt Volume Flow Rate (MVR)	275°C/5.0 kg	ISO 1133	9.00 cm3/10min
Shrinkage rate	Flow	ISO 294-4	0.50 %
Spiral flow length		Internal Method	54.0 CM
Shrinkage rate	横向Flow	ISO 294-4	0.50 %
Water absorption rate	Saturation, 23°C	ISO 62	3.5 to 4.0 %
Humidity Absorption - 62% RH	70°C	ISO 1110	1.1 %
flammability	Test Condition	Test Method	AKRO-PLASTIC GERMANY/PA GF 50 BK
filler content		ISO 1172	50 %
Burning wire flammability index	1.6 mm	IEC 60695-2-12	700 °C
UL flame retardant rating	0.8 mm	UL 94	HB
Burning rate	1.00 mm	FMVSS 302	< 100 mm/min
impact performance	Test Condition	Test Method	AKRO-PLASTIC GERMANY/PA GF 50 BK
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	110 kJ/m²
Impact strength of simply supported beam without notch		-30°C	ISO 179/1eU	95 kJ/m²
hardness	Test Condition	Test Method	AKRO-PLASTIC GERMANY/PA GF 50 BK
Ball Pressure Test	H 961/30	ISO 2039-1	290 Mpa
Electrical performance	Test Condition	Test Method	AKRO-PLASTIC GERMANY/PA GF 50 BK
Relative permittivity	1 MHz	IEC 60250	4.42
Surface resistivity		IEC 60093	1.5E+17 ohms

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index