Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPA PA GF 50 BK AKRO-PLASTIC GERMANY
AKROLOY®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/PA GF 50 BK |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 110 kJ/m² |
| -30°C | ISO 179/1eU | 95 kJ/m² |
| hardness | Test Condition | Test Method | AKRO-PLASTIC GERMANY/PA GF 50 BK |
|---|---|---|---|
| ball-indentation hardness | H 961/30 | ISO 2039-1 | 290 Mpa |
| Mechanical properties | Test Condition | Test Method | AKRO-PLASTIC GERMANY/PA GF 50 BK |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 17500 Mpa | |
| tensile strength | 断裂 | ISO 527-2/5 | 250 Mpa |
| bending strength | ISO 178 | 380 Mpa | |
| Flexural modulus | ISO 178 | 16400 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/5 | 3.0 % |
| Electrical performance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/PA GF 50 BK |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | 解决方案 A | IEC 60112 | V |
| relative permittivity | 1 MHz | IEC 60250 | 4.42 |
| Surface Resistivity | IEC 60093 | 1.5E+17 ohms |
| flammability | Test Condition | Test Method | AKRO-PLASTIC GERMANY/PA GF 50 BK |
|---|---|---|---|
| burning rate | 1.00 mm | FMVSS 302 | < 100 mm/min |
| filler content | ISO 1172 | 50 % | |
| UL flame retardant rating | 0.8 mm | UL 94 | HB |
| Burning wire flammability index | 1.6 mm | IEC 60695-2-12 | 700 °C |
| physical property | Test Condition | Test Method | AKRO-PLASTIC GERMANY/PA GF 50 BK |
|---|---|---|---|
| Melt volume flow rate | 275°C/5.0 kg | ISO 1133 | 9.00 cm3/10min |
| spiral flow length | 内部方法 | 54.0 CM | |
| Humidity Absorption - 62% RH | 70°C | ISO 1110 | 1.1 % |
| Shrinkage rate | 流量 | ISO 294-4 | 0.50 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 3.5 to 4.0 % |
| Shrinkage rate | 横向流量 | ISO 294-4 | 0.50 % |
| Thermal performance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/PA GF 50 BK |
|---|---|---|---|
| Heat distortion temperature | 0.45 MPa, 未退火，HDT | ISO 75-2/B | 245 °C |
| Linear coefficient of thermal expansion | 横向 : 23 到 80°C | ISO 11359-2 | 6.5E-5 cm/cm/°C |
| 流动 : 23 到 80°C | ISO 11359-2 | 1.5E-5 cm/cm/°C | |
| Temperature index - at 50% loss of tensile strength | 140 to 150 °C | ||
| vicat | ISO 306/B50 | 242 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/A | 225 °C |
| melting temperature | DIN EN 11357-1 | 255 °C |
Contact Us
Get App
Top