Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE JM710 SK KOREA
YUCLAIR®
--
Easy to process
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | SK KOREA/JM710 |
|---|---|---|---|
| Environmental stress cracking resistance | ASTM D-1693 | 2 hr |
| Basic performance | Test Condition | Test Method | SK KOREA/JM710 |
|---|---|---|---|
| density | ASTM D-1505 | 0.950 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 33 g/10min |
| Mechanical properties | Test Condition | Test Method | SK KOREA/JM710 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 2 kg·cm/cm(J/M)ft·lb/in | |
| tensile strength | 屈服 | ASTM D-638 | 230 kg/cm |
| elongation | 断裂 | ASTM D-638 | 270 % |
| Flexural modulus | ASTM D790/ISO 178 | 8500 kg/cm²(MPa)[Lb/in²] | |
| Shore hardness | ASTM D-2240 | 61 Shore D | |
| Impact strength of cantilever beam gap | ASTM D-256 | 2 kg.cm/cm | |
| bending strength | ASTM D-747 | 8500 kg/cm | |
| tensile strength | 断裂 | ASTM D-638 | 70 kg/cm |
| other | Test Condition | Test Method | SK KOREA/JM710 |
|---|---|---|---|
| characteristic | 注射成型 | ||
| purpose | 高速注射. 容器 |
| Physical properties | Test Condition | Test Method | SK KOREA/JM710 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 0.95 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 45 g/10min |
| Thermal performance | Test Condition | Test Method | SK KOREA/JM710 |
|---|---|---|---|
| vicat | ASTM D1525/ISO R306 | 122 ℃（℉） | |
| ASTM D-1525 | 122 °C | ||
| melting temperature | ASTM D-2117 | 130 °C |
Contact Us
Get App
Top