Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic Resiten® 120FRAA Iten Industries
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Iten Industries/Resiten® 120FRAA |
|---|---|---|---|
| Impact strength of cantilever beam gap | 横向流量:3.18mm | ASTM D256 | 26 J/m |
| 流量:3.18mm | ASTM D256 | 28 J/m |
| Electrical performance | Test Condition | Test Method | Iten Industries/Resiten® 120FRAA |
|---|---|---|---|
| High Voltage Arc Traceability Rate (HVTR) | 3.18mm | UL 746 | PLC 0 mm/min |
| Hot wire ignition (HWI) | 3.18mm | UL 746 | PLC 1 sec |
| dielectric strength | 3.18mm | ASTM D149 | >18 kV/mm |
| arc resistance | 3.18mm | ASTM D495 | 123 sec |
| Compared to the Leakage Tracking Index (CTI) | 3.18mm | UL 746 | PLC 1 |
| High arc combustion index (HAI) | 3.18mm | UL 746 | PLC 0 |
| dielectric strength | 3.18mm | ASTM D149 | 45000 V |
| Mechanical properties | Test Condition | Test Method | Iten Industries/Resiten® 120FRAA |
|---|---|---|---|
| bending strength | 3.18mm3 | ASTM D790 | 92.4 MPa |
| 3.18mm2 | ASTM D790 | 130 MPa |
| flammability | Test Condition | Test Method | Iten Industries/Resiten® 120FRAA |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Iten Industries/Resiten® 120FRAA |
|---|---|---|---|
| Water absorption rate | 24hr,3.18mm | ASTM D570 | 1.5 % |
| density | ASTM D792 | 1.45 g/cm³ |
| Thermal performance | Test Condition | Test Method | Iten Industries/Resiten® 120FRAA |
|---|---|---|---|
| RTI | 3.2mm | UL 746 | 50.0 °C |
| RTI Elec | 3.2mm | UL 746 | 50.0 °C |
Contact Us
Get App
Top