plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic Plenco 04301 (Injection) Plastics Engineering Co.
--
--
Filler, mineral filler,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodPlastics Engineering Co./Plenco 04301 (Injection)
Rockwell hardnessE-SaleASTM D78580
thermal performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04301 (Injection)
Continuous use temperatureASTM D794201 °C
Hot deformation temperature1.8MPa,UnannealedASTM D648173 °C
Linear coefficient of thermal expansionMDASTME8314.4E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodPlastics Engineering Co./Plenco 04301 (Injection)
Bending modulusASTM D7907860 MPa
bending strengthASTM D79079.9 MPa
compressive strengthASTM D695184 MPa
elongationBreakASTM D6380.70 %
Tensile modulusASTM D6388710 MPa
tensile strengthASTM D63850.0 MPa
Electrical performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04301 (Injection)
Arc resistanceASTM D495163 sec
Compared to the anti leakage trace indexCTIUL 746PLC 3
Dielectric constant1MHzASTM D1505.50
Dielectric strength--4ASTM D1497.2 kV/mm
--3ASTM D14911 kV/mm
Dissipation factor1MHzASTM D1500.064
Volume resistivityASTM D2571.7E+11 ohms·cm
Physical propertiesTest ConditionTest MethodPlastics Engineering Co./Plenco 04301 (Injection)
Apparent densityASTM D18950.62 g/cm³
densityASTM D7921.51 g/cm³
Shrinkage rateMDASTM D9550.74 %
Water absorption rate24hrASTM D5700.19 %
impact performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04301 (Injection)
Charpy Notched Impact StrengthASTM D25615.3 J/m
Impact strength of cantilever beam gapASTM D25614 J/m
flammabilityTest ConditionTest MethodPlastics Engineering Co./Plenco 04301 (Injection)
Extreme Oxygen IndexASTM D286340 %
UL flame retardant rating1.5mmUL 94V-0

Contact Us

Get App

Top