Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

MBS 165 INEOS STYRO USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Mechanical properties | Test Condition | Test Method | INEOS STYRO USA/165 |
---|---|---|---|
Tensile modulus | ASTM D638 | 1520 Mpa | |
ISO 527-2 | 1520 Mpa | ||
elongation | 断裂 | ASTM D638 | 50 % |
Rockwell hardness | M级 | ASTM D785 | 70 |
bending strength | ISO 178 | 37.0 Mpa | |
tensile strength | 屈服,23°C | ISO 527-2 | 21.0 Mpa |
Flexural modulus | ISO 178 | 1650 Mpa | |
bending strength | ASTM D790 | 37.2 Mpa | |
tensile strength | 屈服,23°C | ASTM D638 | 20.7 Mpa |
Flexural modulus | ASTM D790 | 1550 Mpa |
optical performance | Test Condition | Test Method | INEOS STYRO USA/165 |
---|---|---|---|
transmissivity | 550nm | ASTM D1003 | 90.0 % |
refractive index | ASTM D542 | 1.570 | |
Haze ratio | ASTM D1003 | 2.2 % | |
refractive index | ISO 489 | 1.570 |
physical property | Test Condition | Test Method | INEOS STYRO USA/165 |
---|---|---|---|
melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 5.0 g/10min |
Shrinkage rate | MD | ASTM D955 | 0.20-0.60 % |
Water absorption rate | 饱和,23°C | ASTM D570 | 0.10 % |
Shrinkage rate | ISO 294-4 | 0.20-0.60 % | |
Water absorption rate | 饱和,23°C | ISO 62 | 0.10 % |
density | ASTM D792 | 1.04 g/cm³ | |
ISO 1183 | 1.04 g/cm³ | ||
Melt volume flow rate | 200°C/5.0kg | ISO 1133 | 5.00 cm3/10min |
Thermal performance | Test Condition | Test Method | INEOS STYRO USA/165 |
---|---|---|---|
vicat | ASTM D15252 | 93.9 °C | |
maximum service temperature | 250 °C |
Contact Us
Get App
Top