Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO(PPE) Norylux™ EN-265 Westlake Plastics Company
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Westlake Plastics Company/Norylux™ EN-265 |
|---|---|---|---|
| Impact strength of cantilever beam gap | -40°C | ASTM D256 | 130 J/m |
| 23°C | ASTM D256 | 190 J/m |
| hardness | Test Condition | Test Method | Westlake Plastics Company/Norylux™ EN-265 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 119 |
| Electrical performance | Test Condition | Test Method | Westlake Plastics Company/Norylux™ EN-265 |
|---|---|---|---|
| Dissipation Factor | 60Hz | ASTM D150 | 7E-04 |
| dielectric constant | 60Hz | ASTM D150 | 2.69 |
| dielectric strength | ASTM D149 | 20 kV/mm |
| Mechanical properties | Test Condition | Test Method | Westlake Plastics Company/Norylux™ EN-265 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 25 % |
| bending strength | 屈服 | ASTM D790 | 99.3 MPa |
| Flexural modulus | ASTM D790 | 2550 MPa | |
| tensile strength | 屈服 | ASTM D638 | 63.4 MPa |
| flammability | Test Condition | Test Method | Westlake Plastics Company/Norylux™ EN-265 |
|---|---|---|---|
| UL flame retardant rating | 6.0mm | UL 94 | V-0 |
| 1.5mm | UL 94 | V-1 |
| physical property | Test Condition | Test Method | Westlake Plastics Company/Norylux™ EN-265 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.070 % |
| density | ASTM D792 | 1.08 g/cm³ |
| Thermal performance | Test Condition | Test Method | Westlake Plastics Company/Norylux™ EN-265 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 123 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.9E-05 cm/cm/°C |
Contact Us
Get App
Top