Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PAS RTP 1601 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 1601 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 59 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 480 J/m |
| Electrical performance | Test Condition | Test Method | RTP US/RTP 1601 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| dielectric strength | ASTM D149 | 17 kV/mm | |
| Dissipation Factor | 1MHz | ASTM D150 | 7E-03 |
| dielectric constant | 1MHz | ASTM D150 | 3.70 |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 1601 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.5 % |
| bending strength | 屈服 | ASTM D790 | 152 MPa |
| Flexural modulus | ASTM D790 | 4140 MPa | |
| Tensile modulus | ASTM D638 | 4480 MPa | |
| tensile strength | 屈服 | ASTM D638 | 96.5 MPa |
| flammability | Test Condition | Test Method | RTP US/RTP 1601 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | RTP US/RTP 1601 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.60to0.70 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.41 % |
| density | ASTM D792 | 1.44 g/cm³ |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 1601 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 204 °C |
Contact Us
Get App
Top