Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 Wondel® B BR0G4 Nanjing Julong Engineering Plastics Co., LTD
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® B BR0G4 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | 4.0 kJ/m² |
| hardness | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® B BR0G4 |
|---|---|---|---|
| Rockwell hardness | R计秤 | ISO 2039-2 | 120 |
| Electrical performance | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® B BR0G4 |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 20 kV/mm | |
| Surface Resistivity | IEC 60093 | 1E+12 ohms |
| Mechanical properties | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® B BR0G4 |
|---|---|---|---|
| Tensile strain | 断裂 | ISO 527-2 | 2.0 % |
| tensile strength | 屈服 | ISO 527-2 | 120 MPa |
| bending strength | ISO 178 | 180 MPa |
| flammability | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® B BR0G4 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® B BR0G4 |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.30to0.70 % | |
| Water absorption rate | 23°C,24hr | ISO 62 | 6.5 % |
| density | ISO 1183 | 1.40 g/cm³ |
| Thermal performance | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® B BR0G4 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 210 °C |
| melting temperature | ISO 3146 | 220 °C |
Contact Us
Get App
Top