plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM TF-10 JAPAN POLYPLASTIC
DURACON®
Automotive Applications,Electrical applications
High rigidity,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10
Rockwell hardnessM-ScaleISO 2039-265
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10
ColourNumberCF2003/CF2004
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A82.0 °C
Linear coefficient of thermal expansionMD：23to55°CInternal Method1.3E-04 cm/cm/°C
TD：23to55°CInternal Method1.3E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10
Bending modulusISO 1781700 Mpa
bending strengthISO 17860.0 Mpa
Friction coefficientDynamic2JISK72180.60
Steel - Dynamic3JISK72180.30
Nominal tensile fracture strainISO 527-255 %
Tensile modulusISO 527-21850 Mpa
tensile strengthISO 527-246.0 Mpa
Wear factor0.49MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK7218600 10^-8mm³/N·m
0.49MPa,0.30m/sec5JISK7218100 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK7218700 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10
Surface resistivityIEC 600937E+12 ohms
Volume resistivityIEC 600931E+13 ohms·cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10
densityISO 11831.38 g/cm³
melt mass-flow rate190°C/2.16kgISO 113310 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11339.00 cm3/10min
Shrinkage rateTD:2.00mmISO 294-41.7 %
MD:2.00mmISO 294-41.9 %
Water absorption rate23°C,24hrISO 620.70 %
impact performanceTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10
Charpy Notched Impact Strength23°CISO 179/1eA12 kJ/m²

Contact Us

Get App

Top