Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 47H ASCEND USA
Vydyne®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ASCEND USA/47H |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | NoBreak |
| -30°C | ISO 179 | NoBreak |
| Supplementary Information | Test Condition | Test Method | ASCEND USA/47H |
|---|---|---|---|
| Automotive Materials | thicknessd=1mm | FMVSS302 | + |
| Electrical performance | Test Condition | Test Method | ASCEND USA/47H |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | 3.00mm | IEC 60112 | PLC 1 |
| High Voltage Arc Traceability Rate (HVTR) | HVTR | UL 746 | PLC 2 |
| Hot wire ignition (HWI) | 0.75mm | UL 746 | PLC 4 |
| 1.5mm | UL 746 | PLC 4 | |
| High arc combustion index (HAI) | 1.5mm | UL 746 | PLC 0 |
| Volume resistivity | 0.750mm | IEC 60093 | 1E+11 ohms·cm |
| arc resistance | ASTM D495 | PLC6 | |
| Hot wire ignition (HWI) | 3.0mm | UL 746 | PLC 3 |
| dielectric strength | 1.00mm | IEC 60243 | 12 KV/mm |
| High arc combustion index (HAI) | 3.0mm | UL 746 | PLC 0 |
| 0.75mm | UL 746 | PLC 0 |
| Mechanical properties | Test Condition | Test Method | ASCEND USA/47H |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2780 Mpa | |
| bending strength | ISO 178 | 70.0 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 22 % |
| Flexural modulus | ISO 178 | 2300 Mpa | |
| tensile strength | 断裂 | ISO 527-2 | 52.0 Mpa |
| 屈服 | ISO 527-2 | 60.0 Mpa |
| flammability | Test Condition | Test Method | ASCEND USA/47H |
|---|---|---|---|
| Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 700 °C |
| UL flame retardant rating | 0.75mm | UL 94 | HB |
| 3.0mm | UL 94 | HB | |
| Burning wire flammability index | 1.5mm | IEC 60695-2-12 | 775 °C |
| Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 725 °C |
| 1.5mm | IEC 60695-2-13 | 800 °C | |
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| Burning wire flammability index | 0.75mm | IEC 60695-2-12 | 700 °C |
| Hot filament ignition temperature | 0.75mm | IEC 60695-2-13 | 725 °C |
| physical property | Test Condition | Test Method | ASCEND USA/47H |
|---|---|---|---|
| Shrinkage rate | MD:2.00mm | ISO 294-4 | 1.8 % |
| Water absorption rate | 23°C,24hr | ISO 62 | 1.2 % |
| Shrinkage rate | TD:2.00mm | ISO 294-4 | 1.6 % |
| Water absorption rate | 平衡,50%RH | ISO 62 | 2.3 % |
| Thermal performance | Test Condition | Test Method | ASCEND USA/47H |
|---|---|---|---|
| RTI Str | 0.75mm | UL 746 | 115 °C |
| RTI Imp | 1.5mm | UL 746 | 75.0 °C |
| RTI Elec | 3.0mm | UL 746 | 130 °C |
| RTI Imp | 3.0mm | UL 746 | 75.0 °C |
| RTI Elec | 0.75mm | UL 746 | 130 °C |
| RTI Imp | 0.75mm | UL 746 | 75.0 °C |
| melting temperature | ISO 11357-3 | 260 °C | |
| Linear coefficient of thermal expansion | TD：23to55°C,2.00mm | ISO 11359-2 | 1.4E-04 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 185 °C |
| RTI Str | 1.5mm | UL 746 | 115 °C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 63.0 °C |
| RTI Str | 3.0mm | UL 746 | 115 °C |
| RTI Elec | 1.5mm | UL 746 | 130 °C |
| Linear coefficient of thermal expansion | MD：23to55°C,2.00mm | ISO 11359-2 | 1.1E-04 cm/cm/°C |
Contact Us
Get App
Top