Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT G20 JIANGSU SANFAME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic Performance | Test Condition | Test Method | JIANGSU SANFAME/G20 |
|---|---|---|---|
| density | ASTM D-792 | 1.56 g/cm³ | |
| Water absorption rate | 23℃,50%RH | ASTM D-570 | 0.10 % |
| thermal performance | Test Condition | Test Method | JIANGSU SANFAME/G20 |
|---|---|---|---|
| Combustibility | 1/16" | UL 94 | V-0 |
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 200 ℃(℉) |
| 1.82MPa | ASTM D-648 | 200 °C | |
| 0.46MPa | ASTM D-648 | 215 °C |
| mechanical properties | Test Condition | Test Method | JIANGSU SANFAME/G20 |
|---|---|---|---|
| Bending modulus | ASTM D-790 | 6000 Mpa | |
| ASTM D790/ISO 178 | 6000 kg/cm²(MPa)[Lb/in²] | ||
| bending strength | ASTM D790/ISO 178 | 160 kg/cm²(MPa)[Lb/in²] | |
| ASTM D-790 | 160 Mpa | ||
| elongation | ASTM D-638 | 3 % | |
| Elongation at Break | ASTM D638/ISO 527 | 3 % | |
| Impact strength of cantilever beam gap | Unnotched | ASTM D-256 | 350 J/m |
| Notched | ASTM D-256 | 60 J/m | |
| tensile strength | ASTM D-638 | 100 Mpa | |
| ASTM D638/ISO 527 | 100 kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | JIANGSU SANFAME/G20 |
|---|---|---|---|
| Dielectric constant | ASTM D150/IEC 60250 | 3.4 | |
| 106Hz | ASTM D-150 | 3.4 | |
| Dielectric loss | 106Hz | ASTM D-150 | 0.02 |
| Dielectric strength | ASTM D-149 | 21 KV/mm | |
| Volume resistivity | ASTM D-257 | 1016 Ω.cm | |
| ASTM D257/IEC 60093 | 1016 Ω.cm |
| Physical properties | Test Condition | Test Method | JIANGSU SANFAME/G20 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.56 | |
| Shrinkage rate | ASTM D955 | 0.6-1.5 % | |
| ASTM D-955 | 0.6-1.5 % |