Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT 3100H-ED3002 JAPAN POLYPLASTIC
DURANEX®
Casters,Fitness equipment
Glass fiber reinforced,Flame retardant,7.5%GF,Filler: Glass fiber reinf,7.5% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | JAPAN POLYPLASTIC/3100H-ED3002 |
|---|---|---|---|
| Rockwell hardness | M-Scale | ISO 2039-2 | 90 |
| Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/3100H-ED3002 |
|---|---|---|---|
| ColourNumber | EF2001/ED3002 |
| thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/3100H-ED3002 |
|---|---|---|---|
| Hot deformation temperature | HDT | ASTM D75-1 | 199 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 199 °C | |
| Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 6E-05 cm/cm/°C |
| TD:23to55°C | Internal Method | 1E-04 cm/cm/°C | |
| UL flame retardant rating | UL 94 | HB |
| mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/3100H-ED3002 |
|---|---|---|---|
| Bending modulus | ISO 178 | 3830 Mpa | |
| ASTM D178 | 3830 Mpa | ||
| bending strength | ISO 178 | 135 Mpa | |
| ASTM D178 | 135 Mpa | ||
| Charpy Notched Impact Strength | ASTM D179/1eA | 4.0 kJ/m² | |
| Tensile strain | Break | ASTM D527-1 | 4.0 % |
| Break | ISO 527-2 | 4.0 % | |
| tensile strength | ASTM D527-1 | 81 Mpa | |
| ISO 527-2 | 81.0 Mpa |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/3100H-ED3002 |
|---|---|---|---|
| Dielectric strength | 3.00mm | IEC 60243-1 | 17 KV/mm |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/3100H-ED3002 |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 % |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/3100H-ED3002 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |