Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC CF-2030 MITSUBISHI ENGINEERING JAPAN
IUPILON™
fibre
enhance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/CF-2030 |
|---|---|---|---|
| bending strength | ASTM D790/ISO 178 | 261 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 16200 kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | 18000 kg/cm²(MPa)[Lb/in²] | |
| elongation at break | ASTM D638/ISO 527 | 2.2 % | |
| tensile strength | ASTM D638/ISO 527 | 160 kg/cm²(MPa)[Lb/in²] |
| other | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/CF-2030 |
|---|---|---|---|
| notes | 以上加工数据.为参考值.以生产厂商设备的实际状况而进行调整 |
| Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/CF-2030 |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.20-0.40 % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.070 % |
| Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/CF-2030 |
|---|---|---|---|
| Heat distortion temperature | HDT | ASTM D648/ISO 75 | 152 ℃（℉） |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.000057 mm/mm.℃ |
Contact Us
Get App
Top