plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS K-095 DENKA JAPAN
MALECCA 
--
heat-resisting
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Basic PerformanceTest ConditionTest MethodDENKA JAPAN/K-095
melt mass-flow rate220℃,10kgJIS K-687410 g/10min
thermal performanceTest ConditionTest MethodDENKA JAPAN/K-095
Hot deformation temperatureHDTASTM D648/ISO 75100 ℃(℉)
6.4mm,1.82MPaASTM D-648100 °C
Vicat softening temperatureASTM D1525/ISO R306110 ℃(℉)
5kgJIS K-7206110 °C
mechanical propertiesTest ConditionTest MethodDENKA JAPAN/K-095
Bending modulus15mm/minASTM D-7902350 Mpa
ASTM D790/ISO 1782350 kg/cm²(MPa)[Lb/in²]
bending strengthASTM D790/ISO 17874 kg/cm²(MPa)[Lb/in²]
15mm/minASTM D-79074 Mpa
Impact strength of cantilever beam gapASTM D256/ISO 179206 kg·cm/cm(J/M)ft·lb/in
1/4"带Notched23℃ASTM D-256206 J/m
Rockwell hardnessASTM D785114
23℃ASTM D-785114 R
tensile strengthASTM D638/ISO 52742 kg/cm²(MPa)[Lb/in²]
ASTM D-63842 Mpa
Physical propertiesTest ConditionTest MethodDENKA JAPAN/K-095
densityASTM D792/ISO 11831.05
melt mass-flow rateASTM D1238/ISO 113310 g/10min
Shrinkage rateASTM D9550.4-0.6 %