Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 6267 X COVESTRO SHANGHAI
Makrolon®
Home appliance components,Bottle cap,Electronic and electrical components,Lighting applications
Low viscosity,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | COVESTRO SHANGHAI/6267 X |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 无断裂 |
| Multi axis Instrumented Impact Energy | -30°C | ISO 6603-2 | 55.0 J |
| Charpy Notched Impact Strength | -30°C,完全断裂 | ISO 7391 | 12 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 无断裂 |
| Impact strength of cantilever beam gap | 23°C,局部断裂 | ISO 7391 | 15 kJ/m² |
| Charpy Notched Impact Strength | 23°C,局部断裂 | ISO 7391 | 60 kJ/m² |
| Multi axis Instrumented Impact Energy | 23°C | ISO 6603-2 | 50.0 J |
| Multi axis Instrumented Peak Impact Force | 23°C | ISO 6603-2 | 5000 N |
| Impact strength of cantilever beam gap | -30°C,完全断裂 | ISO 7391 | 11 kJ/m² |
| Multi axis Instrumented Peak Impact Force | -30°C | ISO 6603-2 | 5900 N |
| hardness | Test Condition | Test Method | COVESTRO SHANGHAI/6267 X |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 116 Mpa |
| Supplementary Information | Test Condition | Test Method | COVESTRO SHANGHAI/6267 X |
|---|---|---|---|
| electrolytic corrosion | 23°C | IEC 60426 | A1 |
| thermal performance | Test Condition | Test Method | COVESTRO SHANGHAI/6267 X |
|---|---|---|---|
| thermal conductivity | 23°C | ISO 8302 | 0.20 W/m/K |
| Heat Deflection Temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 122 °C |
| RTI Imp | 1.5mm | UL 746 | 115 °C |
| Heat Deflection Temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 134 °C |
| RTI | 1.5mm | UL 746 | 125 °C |
| vicat | -- | ISO 306/B120 | 145 °C |
| RTI Elec | 1.5mm | UL 746 | 125 °C |
| vicat | -- | ISO 306/B50 | 144 °C |
| Linear coefficient of thermal expansion | TD:23到55°C | ISO 11359-2 | 6.5E-05 cm/cm/°C |
| ball-indentation hardness | 135°C | IEC 60695-10-2 | 通过 |
| Linear coefficient of thermal expansion | MD:23到55°C | ISO 11359-2 | 6.5E-05 cm/cm/°C |
| Mechanical properties | Test Condition | Test Method | COVESTRO SHANGHAI/6267 X |
|---|---|---|---|
| flexural modulus | 23°C | ISO 178 | 2400 Mpa |
| bending strength | 3.5%应变,23°C | ISO 178 | 74.0 Mpa |
| Bending Strain | 23°C | ISO 178 | 6.9 % |
| bending strength | 23°C | ISO 178 | 97.0 Mpa |
| Tensile strain | 屈服,23°C | ISO 527-2/50 | 6.0 % |
| Tensile modulus | 23°C | ISO 527-2/1 | 2450 Mpa |
| Tensile strain | 断裂,23°C | ISO 527-2/50 | 120 % |
| Nominal tensile fracture strain | 23°C | ISO 527-2/50 | >50 % |
| tensile strength | 断裂,23°C | ISO 527-2/50 | 65.0 Mpa |
| 屈服,23°C | ISO 527-2/50 | 67.0 Mpa |
| Electrical performance | Test Condition | Test Method | COVESTRO SHANGHAI/6267 X |
|---|---|---|---|
| dielectric strength | 23°C,1.00mm | IEC 60243-1 | 34 KV/mm |
| Compared to the Leakage Tracking Index (CTI) | 解决方案B | IEC 60112 | V |
| relative permittivity | 23°C,1MHz | IEC 60250 | 3.00 |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | V |
| relative permittivity | 23°C,100Hz | IEC 60250 | 3.10 |
| Surface Resistivity | IEC 60093 | 1E+16 ohms | |
| volume resistivity | 23°C | IEC 60093 | 1E+16 ohms·cm |
| Dissipation Factor | 23°C,100Hz | IEC 60250 | 8E-04 |
| 23°C,1MHz | IEC 60250 | 9E-03 |
| Physical properties | Test Condition | Test Method | COVESTRO SHANGHAI/6267 X |
|---|---|---|---|
| Apparent density | ISO 60 | 0.64 g/cm³ | |
| melt mass-flow rate | 300°C/1.2kg | ISO 1133 | 20 g/10min |
| shrinkage rate | MD | ISO 2577 | 0.50-0.70 % |
| TD:2.00mm4 | ISO 294-4 | 0.65 % | |
| Melt volume flow rate | 300°C/1.2kg | ISO 1133 | 19.0 cm3/10min |
| shrinkage rate | MD:2.00mm4 | ISO 294-4 | 0.65 % |
| Water absorption rate | 饱和,23°C | ISO 62 | 0.30 % |
| shrinkage rate | TD | ISO 2577 | 0.50-0.70 % |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.12 % |
| flammability | Test Condition | Test Method | COVESTRO SHANGHAI/6267 X |
|---|---|---|---|
| Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 1.50mm | IEC 60695-11-5 | 2.0 min |
| FlashIgnitionTemperature | ASTM D1929 | 460 °C | |
| UL flame retardant rating | 2.00mm | IEC 60695-11-5 | 2.0 min |
| ApplicationofFlamefromSmallBurner-Method | 2.00mm | DIN 53438-1,-3 | K1.F1 |
| Burning rate - US-FMVSS | >1.00mm | ISO 3795 | passed |
| Burning wire flammability index | 1.5mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 3.00mm | IEC 60695-11-5 | 2.0 min |
| 1.5mm | UL 94 | V-0 | |
| Burning wire flammability index | 0.75mm | IEC 60695-2-12 | 960 °C |
| Limiting Oxygen Index | ISO 4589-2 | 36 % | |
| SelfIgnitionTemperature | ASTM D1929 | 530 °C |
Contact Us
Get App
Top