Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM H2320-004 BASF KOREA
Ultraform®
Thick walled components
high molecular weight、Ultral&reg
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | BASF KOREA/H2320-004 |
|---|---|---|---|
| Tensile creep modulus | 1000h | ISO 899-1 | 189000 psi |
| Tensile stress | 73℉ | ISO 527-1 | 9280 psi |
| Tensile strain | 73℉，屈服 | ISO 527-1 | 11 % |
| Charpy Notched Impact Strength | -22℉ | ISO 179 | 2.62 ft·lb/in |
| Impact strength of simply supported beam without notch | -22℉ | ISO 179 | 99.9 ft·lb/in |
| 73℉ | ISO 179 | 119 ft·lb/in | |
| Tensile modulus | 73℉ | ISO 527-1 | 377000 psi |
| Charpy Notched Impact Strength | 73℉ | ISO 179 | 2.86 ft·lb/in |
| Electrical performance | Test Condition | Test Method | BASF KOREA/H2320-004 |
|---|---|---|---|
| Dielectric loss | 1E+6HZ，73℉ | IEC 60250 | 0.00500 |
| Volume resistivity | IEC 60093 | 1E+15 ohm·cm | |
| IEC 60093 | 1E+13 ohms |
| processability | Test Condition | Test Method | BASF KOREA/H2320-004 |
|---|---|---|---|
| process temperature | 374-446 ℉ |
| physical property | Test Condition | Test Method | BASF KOREA/H2320-004 |
|---|---|---|---|
| Water absorption rate | 23C/50RH | ISO 62 | 0.2 % |
| Thermal performance | Test Condition | Test Method | BASF KOREA/H2320-004 |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa，HDT | ISO 75A-1 | 203 ℉ |
| UL flame retardant rating | UL 94 | HB |
Contact Us
Get App
Top