Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM GN705 ASAHI JAPAN
TENAC™
Automotive Applications
Glass fiber reinforced
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | ASAHI JAPAN/GN705 |
---|---|---|---|
Combustibility (rate) | UL 94 | HB | |
Hot deformation temperature | 0.45MPa | ASTM D648 | 174 °C |
1.82MPa | ASTM D648 | 170 °C | |
Linear coefficient of thermal expansion | 4/9 | ||
melt mass-flow rate | ASTM D1238 | 10 g/10min | |
UL flame retardant rating | UL 94 | HB |
mechanical properties | Test Condition | Test Method | ASAHI JAPAN/GN705 |
---|---|---|---|
Bending modulus | ASTM D790 | 8230 Mpa | |
bending strength | ASTM D790 | 196 Mpa | |
Elongation at Break | ASTM D638 | 3 % | |
Impact strength of cantilever beam gap | ASTM D256 | 78 J/m | |
Rockwell hardness | ASTM D785 | 120 R | |
ASTM D785 | 90 M | ||
Tensile modulus | ASTM D638/ISO 527 | 9000(MPa) kg/cm²(MPa)[Lb/in²] | |
tensile strength | ASTM D638 | 127 Mpa | |
Wear resistance | ASTM D1044 | 23 |
other | Test Condition | Test Method | ASAHI JAPAN/GN705 |
---|---|---|---|
characteristic | 玻璃纤维增强材料 |
Physical properties | Test Condition | Test Method | ASAHI JAPAN/GN705 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.59 | |
Shrinkage rate | Flow | 0.4-05 % | |
Across Flow | 1.0-1.2 % | ||
Water absorption rate | ASTM D570 | 0.2 % |