Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
DAP RX® 2-520 SBHPP
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SBHPP/RX® 2-520 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256A | 27 J/m |
| Mechanical properties | Test Condition | Test Method | SBHPP/RX® 2-520 |
|---|---|---|---|
| tensile strength | ASTM D638 | 70.0 MPa | |
| compressive strength | ASTM D695 | 165 MPa | |
| Flexural modulus | ASTM D790 | 17800 MPa | |
| bending strength | ASTM D790 | 120 MPa |
| Electrical performance | Test Condition | Test Method | SBHPP/RX® 2-520 |
|---|---|---|---|
| dielectric strength | ASTM D149 | 14 kV/mm | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.017 |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112,ASTMD3638 | PLC 0 | |
| dielectric constant | 1MHz | ASTM D150 | 4.00 |
| arc resistance | ASTM D495 | 170 sec |
| flammability | Test Condition | Test Method | SBHPP/RX® 2-520 |
|---|---|---|---|
| Limiting Oxygen Index | ASTM D2863 | 25 % |
| physical property | Test Condition | Test Method | SBHPP/RX® 2-520 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.30to0.50 % |
| density | ASTM D792 | 1.91 g/cm³ |
| Thermal performance | Test Condition | Test Method | SBHPP/RX® 2-520 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648A | >260 °C |
| RTI Imp | UL 746 | 130 °C | |
| Linear coefficient of thermal expansion | MD | ASTME831 | 1.8E-05 cm/cm/°C |
| RTI | UL 746 | 130 °C | |
| RTI Elec | UL 746 | 130 °C |
Contact Us
Get App
Top