Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LDPE LD608 SINOPEC YANSHAN
--
film、Food service sector
transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SINOPEC YANSHAN/LD608 |
|---|---|---|---|
| Impact Strength | ARM | 180 J/cm |
| hardness | Test Condition | Test Method | SINOPEC YANSHAN/LD608 |
|---|---|---|---|
| Shore hardness | 邵氏 D | ISO 868 | 68 |
| Mechanical properties | Test Condition | Test Method | SINOPEC YANSHAN/LD608 |
|---|---|---|---|
| Flexural modulus | ISO 178 | 600 Mpa | |
| Tensile strain | 屈服 | ISO 527-2 | 500 % |
| tensile strength | 屈服 | ISO 527-2 | 18.0 Mpa |
| Electrical performance | Test Condition | Test Method | SINOPEC YANSHAN/LD608 |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1.0E+17 ohms |
| flammability | Test Condition | Test Method | SINOPEC YANSHAN/LD608 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| UV Rating | ASTM D2565 | 8000 hr |
| physical property | Test Condition | Test Method | SINOPEC YANSHAN/LD608 |
|---|---|---|---|
| Apparent density | ISO 60 | 0.38 g/cm³ | |
| melt mass-flow rate | 190°C/2.16 kg | ISO 1133 | 8.0 g/10 min |
| density | ISO 1183 | 0.935 g/cm³ | |
| Environmental stress cracking resistance | ASTM D1693 | 300 hr |
| Thermal performance | Test Condition | Test Method | SINOPEC YANSHAN/LD608 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 118 °C | |
| Heat distortion temperature | 0.45 MPa, 未退火，HDT | ISO 75-2/B | 66.0 °C |
| Oxygen induction time | ISO 11357 | 50 min | |
| vicat | ISO 306 | 119 °C | |
| brittle temperature | ISO 974 | -30.0 °C |
Contact Us
Get App
Top