Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS TI-500A DIC JAPAN
--
Home appliance components,Automotive sector
transparent,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic Performance | Test Condition | Test Method | DIC JAPAN/TI-500A |
---|---|---|---|
melt mass-flow rate | 3.2 g/10min |
thermal performance | Test Condition | Test Method | DIC JAPAN/TI-500A |
---|---|---|---|
Combustibility (rate) | UL 94 | HB | |
Hot deformation temperature | HDT | 72 °C | |
Vicat softening temperature | ASTM D1525/ISO R306 | 85 ℃(℉) |
mechanical properties | Test Condition | Test Method | DIC JAPAN/TI-500A |
---|---|---|---|
Bending modulus | 2400 Mpa | ||
ASTM D790/ISO 178 | 3450 kg/cm²(MPa)[Lb/in²] | ||
bending strength | ASTM D790/ISO 178 | 104 kg/cm²(MPa)[Lb/in²] | |
65 Mpa | |||
elongation | 30 % | ||
Elongation at Break | ASTM D638/ISO 527 | 4 % | |
Impact strength of cantilever beam gap | 7 kj/mm | ||
ASTM D256/ISO 179 | 10 kg·cm/cm(J/M)ft·lb/in | ||
Rockwell hardness | 85 L | ||
ASTM D785 | R-69 | ||
tensile strength | 47 Mpa | ||
ASTM D638/ISO 527 | 64(断裂) kg/cm²(MPa)[Lb/in²] |
other | Test Condition | Test Method | DIC JAPAN/TI-500A |
---|---|---|---|
characteristic | 日常杂项物品 |
Physical properties | Test Condition | Test Method | DIC JAPAN/TI-500A |
---|---|---|---|
Ambiguity degree | 2m/m | 2.5 % | |
density | ASTM D792/ISO 1183 | 1.09 | |
melt mass-flow rate | ASTM D1238/ISO 1133 | 2.0 g/10min | |
Shrinkage rate | ASTM D955 | 0.3-0.7 % | |
Total Light Transmittance | 2m/m | 91 % | |
Water absorption rate | ASTM D570/ISO 62 | 0.2 % |