Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS 4000PG LANXESS GERMANY
Novodur®Ultra
Automotive External Parts、Application in the automo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | LANXESS GERMANY/4000PG |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 20 kJ/m² |
| -30°C | ISO 179 | 10 kJ/m² | |
| Impact strength of cantilever beam gap | 23°C | ISO 180/A | 23 kJ/m² |
| -30°C | ISO 180/A | 10 kJ/m² |
| hardness | Test Condition | Test Method | LANXESS GERMANY/4000PG |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 100 Mpa |
| Electrical performance | Test Condition | Test Method | LANXESS GERMANY/4000PG |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Volume resistivity | IEC 60093 | 1E+16 ohms·cm | |
| relative permittivity | 100Hz | IEC 60250 | 3.00 |
| Dissipation Factor | 100Hz | IEC 60250 | 6.5E-03 |
| dielectric strength | 1.50mm | IEC 60243-1 | 38 KV/mm |
| relative permittivity | 1MHz | IEC 60250 | 2.90 |
| Surface Resistivity | IEC 60093 | 1E+16 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 8.5E-03 |
| Mechanical properties | Test Condition | Test Method | LANXESS GERMANY/4000PG |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2400 Mpa | |
| Tensile strain | 断裂,23°C | ISO 527-2 | >15 % |
| bending strength | ISO 178 | 73.0 Mpa | |
| tensile strength | 屈服,23°C | ISO 527-2 | 46.0 Mpa |
| Flexural modulus | ISO 178 | 2350 Mpa | |
| Tensile strain | 屈服,23°C | ISO 527-2 | 3.1 % |
| physical property | Test Condition | Test Method | LANXESS GERMANY/4000PG |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.50-0.80 % | |
| density | ISO 1183 | 1.05 g/cm³ | |
| Melt volume flow rate | 220°C/10.0kg | ISO 1133 | 6.00 cm3/10min |
| Thermal performance | Test Condition | Test Method | LANXESS GERMANY/4000PG |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,退火，HDT | ISO 75-2/A | 98.0 °C |
| vicat | ISO 306/B50 | 107 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 9E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,退火，HDT | ISO 75-2/B | 103 °C |
Contact Us
Get App
Top