Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA9T GA2330 KURARAY JAPAN
Genestar™
Electrical field,Electronic field
heat-resisting,wear resistant,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | KURARAY JAPAN/GA2330 |
---|---|---|---|
Glass transition temperature | 125 °C | ||
Hot deformation temperature | 1.8 MPa, Unannealed | ASTM D648 | 285 °C |
Melting temperature | 306 °C |
mechanical properties | Test Condition | Test Method | KURARAY JAPAN/GA2330 |
---|---|---|---|
Bending modulus | ASTM D790 | 11000 Mpa | |
bending strength | ASTM D790 | 197 Mpa | |
elongation | Break | ASTM D638 | 2.5 % |
tensile strength | ASTM D638 | 175 Mpa |
Electrical performance | Test Condition | Test Method | KURARAY JAPAN/GA2330 |
---|---|---|---|
Dielectric constant | 10.0 GHz | ASTM D150 | 3.40 |
Dielectric strength | ASTM D149 | 30 KV/mm | |
Dissipation factor | 10.0 GHz | ASTM D150 | 0.010 |
Volume resistivity | ASTM D257 | 1.0E+16 ohms·cm |
Physical properties | Test Condition | Test Method | KURARAY JAPAN/GA2330 |
---|---|---|---|
melt mass-flow rate | 320°C/2.16 kg | ASTM D1238 | 13 g/10 min |
Shrinkage rate | Across FlowFlow : 1.00 mm | 0.60 % | |
Flow : 1.00 mm | 0.10 % | ||
Water absorption rate | Equilibrium, 40°C, 95%RH | 1.1 % |
flammability | Test Condition | Test Method | KURARAY JAPAN/GA2330 |
---|---|---|---|
Bar Flow Length | 320°C, 500.0 μm | 4.90 CM | |
Elongation at Break | ASTM D638 | 0.40 % | |
UL flame retardant rating | UL 94 | V-0 | |
Weld Strength | ASTM D638 | 37.0 Mpa |