Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPA DENYL HT 6010 VAMP TECH ITALY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | VAMP TECH ITALY/DENYL HT 6010 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/A | 10 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180 | 50 kJ/m² |
| Electrical performance | Test Condition | Test Method | VAMP TECH ITALY/DENYL HT 6010 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Surface Resistivity | ASTM D257 | 1E+12 ohms |
| Mechanical properties | Test Condition | Test Method | VAMP TECH ITALY/DENYL HT 6010 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 1.6 % |
| Tensile modulus | ASTM D638 | 23000 MPa | |
| tensile strength | 屈服 | ASTM D638 | 250 MPa |
| physical property | Test Condition | Test Method | VAMP TECH ITALY/DENYL HT 6010 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.050 % |
| Water absorption rate | 饱和 | ASTM D570 | 0.30 % |
| density | ASTM D792 | 1.73 g/cm³ | |
| Shrinkage rate | TD | ASTM D955 | 0.30 % |
| Thermal performance | Test Condition | Test Method | VAMP TECH ITALY/DENYL HT 6010 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648A | 280 °C |
| RTI Imp | UL 746 | 150 °C | |
| RTI | UL 746 | 150 °C | |
| RTI Elec | UL 746 | 150 °C |
Contact Us
Get App
Top