plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
SMMA NAS® 21 INEOS Barex
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodINEOS Barex/NAS® 21
Ball Pressure TestISO 2039-1168 MPa
Rockwell hardnessM-ScaleASTM D78570
thermal performanceTest ConditionTest MethodINEOS Barex/NAS® 21
Hot deformation temperature1.8MPa,AnnealedISO 75-2/A80.0 °C
0.45MPa,UnannealedISO 75-2/B90.0 °C
Maximum operating temperature260 °C
Vicat softening temperatureASTM D15253106 °C
ISO 306/B5098.0 °C
mechanical propertiesTest ConditionTest MethodINEOS Barex/NAS® 21
Bending modulusASTM D7903100 MPa
ISO 1783400 MPa
bending strengthISO 178100 MPa
ASTM D79097.2 MPa
elongationBreakASTM D6382.1 %
Tensile modulusISO 527-23300 MPa
ASTM D6383240 MPa
Tensile strainBreak,23°CISO 527-22.5 %
tensile strengthYield,23°CISO 527-260.0 MPa
Yield,23°CASTM D63857.9 MPa
Physical propertiesTest ConditionTest MethodINEOS Barex/NAS® 21
densityISO 11831.08 g/cm³
ASTM D7921.08 g/cm³
melt mass-flow rate200°C/5.0kgASTM D12381.9 g/10min
Melt Volume Flow Rate (MVR)220°C/10.0kgISO 113324.0 cm³/10min
Shrinkage rateISO 294-40.20to0.60 %
MDASTM D9550.20to0.60 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.10 %
Saturation,23°CASTM D5700.10 %
impact performanceTest ConditionTest MethodINEOS Barex/NAS® 21
Charpy Notched Impact Strength23°CISO 1791.5 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/A2.5 kJ/m²
23°CASTM D25621 J/m
Impact strength of simply supported beam without notch23°CISO 17912 kJ/m²
Suspended wall beam without notch impact strengthISO 18012 kJ/m²
optical performanceTest ConditionTest MethodINEOS Barex/NAS® 21
Refractive indexASTM D5421.570
ISO 4891.570
transmissivity550nmASTM D100391.3 %
turbidityASTM D10030.30 %

Contact Us

Get App

Top