Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/ASA W85XF 000000 COVESTRO SHANGHAI
Bayblend®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | COVESTRO SHANGHAI/W85XF 000000 |
|---|---|---|---|
| -30°C | ISO180 | NoBreak | |
| 23°C | ISO180 | NoBreak |
| Mechanical properties | Test Condition | Test Method | COVESTRO SHANGHAI/W85XF 000000 |
|---|---|---|---|
| Tensile stress | 断裂,23°C | ISO527-2/50 | 62.0 Mpa |
| Tensile strain | 断裂,23°C | ISO527-2/50 | >50 % |
| Tensile modulus | 23°C | ISO527-2/1 | 2450 Mpa |
| Tensile strain | 屈服,23°C | ISO527-2/50 | 5.0 % |
| Tensile stress | 屈服,23°C | ISO527-2/50 | 63.0 Mpa |
| Electrical performance | Test Condition | Test Method | COVESTRO SHANGHAI/W85XF 000000 |
|---|---|---|---|
| Surface Resistivity | IEC60093 | 1E+16 ohms | |
| Volume resistivity | 23°C | IEC60093 | 1E+16 ohms·cm |
| 23°C,100Hz | IEC60250 | 3.10 | |
| 23°C,1MHz | IEC60250 | 2.80 | |
| CTI | 解决方案A | IEC60112 | 225 V |
| dielectric strength | 23°C,1.00mm | IEC60243-1 | 35 KV/mm |
| Dissipation Factor | 23°C,100Hz | IEC60250 | 2.5E-03 |
| 23°C,1MHz | IEC60250 | 0.011 |
| flammability | Test Condition | Test Method | COVESTRO SHANGHAI/W85XF 000000 |
|---|---|---|---|
| FlameRating | 0.9mm | UL94 | HB |
| physical property | Test Condition | Test Method | COVESTRO SHANGHAI/W85XF 000000 |
|---|---|---|---|
| Water absorption rate | 平衡,23°C,50%RH | ISO62 | 0.20 % |
| Shrinkage rate | MD:260°C,3.00mm | ISO2577 | 0.55to0.75 % |
| Water absorption rate | 饱和,23°C | ISO62 | 0.50 % |
| MeltViscosity | 260°C | ISO11443-A | 225 Pa·s |
| Melt volume flow rate | 260°C/5.0kg | ISO1133 | 27.0 cm3/10min |
| Shrinkage rate | TD:260°C,3.00mm | ISO2577 | 0.55to0.75 % |
| Thermal performance | Test Condition | Test Method | COVESTRO SHANGHAI/W85XF 000000 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火 | ISO75-2/A | 109 °C |
| vicat | -- | ISO306/B50 | 130 °C |
| -- | ISO306/B120 | 132 °C | |
| Heat distortion temperature | 0.45MPa,未退火 | ISO75-2/B | 127 °C |
| TD：23to55°C | ISO11359-2 | 7E-05 cm/cm/°C | |
| MD：23到55°C | ISO11359-2 | 7E-05 cm/cm/°C |
Contact Us
Get App
Top