Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 B3ZG8 BASF GERMANY
Ultramid®
Automotive sector,Shell,Travel case,Car airbags
Glass fiber reinforced,High impact resistance,High mobility,High rigidity,Low temperature impact re
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | BASF GERMANY/B3ZG8 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa负荷,Dry | 220 °C | |
| 1.8MPa负荷,Dry | 210 °C | ||
| Linear coefficient of thermal expansion | (23-80)℃,Dry | 1-2/5-6 | |
| Maximum operating temperature | 180 °C | ||
| Temperature index | 在20000h/5000h,后拉伸强度下降50%时 | 110/120 °C | |
| thermal conductivity | Dry | 0.32 W/(m.K) |
| mechanical properties | Test Condition | Test Method | BASF GERMANY/B3ZG8 |
|---|---|---|---|
| Ball Pressure Test | 干/湿 | 190/110 Mpa | |
| bending strength | 干/湿 | 270/200 Mpa | |
| Charpy Notched Impact Strength | +23℃,干/湿 | 100/105 KJ/m | |
| 30℃,干 | 90 KJ/m | ||
| 30℃,干/湿 | 20 KJ/m | ||
| Elongation at Break | 干/湿,V=50mm/min | 4/7 % | |
| Fracture stress (V=50mm/min) | 干/湿 | 165/115 Mpa | |
| impact strength | +23℃,干/湿 | 18/25 J | |
| Impact strength of cantilever beam gap | 30℃,干 | 14 KJ/m | |
| +23℃,干/湿 | 22 KJ/m | ||
| Tensile modulus | 干/湿 | 11200/7200 Mpa | |
| Tensile yield stress (V=50mm/min) | 干/湿 | 165/115 Mpa |
| Electrical performance | Test Condition | Test Method | BASF GERMANY/B3ZG8 |
|---|---|---|---|
| Compared to the Leakage Traceability Index (CTI) | 干/湿 | CTI 550 | |
| Dielectric constant | 1MHz,干/湿 | 4/5.3 | |
| Dielectric strength | K20/P50,干/湿 | 80/70 KV/mm | |
| Loss angle | 1MHz,干/湿 | 0.019/0.13 | |
| Surface resistivity | 干/湿 | 10 Ω | |
| Volume resistivity | 干/湿 | 10 Ω.cm |