Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LCP E540I VD3071 CELANESE USA
VECTRA®
household electrical appliances,Plastic insert
Flame retardant,Glass fiber reinforced,Low warpage,40% enhancement,Good flow,Good surface finish,Low warpage
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic Performance | Test Condition | Test Method | CELANESE USA/E540I VD3071 |
---|---|---|---|
density | ISO 1183 | 1740 kg/m |
thermal performance | Test Condition | Test Method | CELANESE USA/E540I VD3071 |
---|---|---|---|
Combustibility | UL 94 | V-0 | |
Crystallization peak temperature | 10℃/min | ISO 11357-1 | 335 °C |
Hot deformation temperature | 1.80MPa | ISO 75-1 | 230 °C |
Linear coefficient of thermal expansion | normal | ISO 11359-1 | 0.000011 cm/cm℃ |
parallel | ISO 11359-1 | 0.000011 cm/cm℃ | |
Vicat softening temperature | 50℃/h 50N | ISO 306 | 195 °C |
mechanical properties | Test Condition | Test Method | CELANESE USA/E540I VD3071 |
---|---|---|---|
Bending modulus | 23℃ | ISO 178 | 10000 Mpa |
bending strength | 23℃ | ISO 178 | 125 Mpa |
elongation | Break | ISO 527-1 | 3.2 % |
Impact strength of cantilever beam gap | 23℃ | ISO 180/1A | 5.20 KJ/m |
Suspended wall beam without notch impact strength | 23℃ | ISO 180/1U | 35.0 KJ/m |
Tensile modulus | ISO 527-1 | 9800 Mpa | |
tensile strength | ISO 527-1 | 105 Mpa |
Electrical performance | Test Condition | Test Method | CELANESE USA/E540I VD3071 |
---|---|---|---|
Compared to the Leakage Traceability Index (CTI) | IEC 60112 | 200 | |
Dielectric loss | 1000Hz | IEC 60250 | 0.031 |
Dielectric strength | IEC 60243-1 | 46 KV/mm | |
Relative permittivity | 1000Hz | IEC 60250 | 3.60 |
Surface resistivity | IEC 60093 | 1E+15 ohms | |
Volume resistivity | IEC 60093 | 1E+14 ohm.m |
Physical properties | Test Condition | Test Method | CELANESE USA/E540I VD3071 |
---|---|---|---|
Shrinkage rate | parallel | ISO 2577 | 0.50 % |
normal | ISO 2577 | 0.0 % |