Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 8600-20-IC7800093 TRINSEO HK
EMERGE™
Electrical enclosure、Electrical/Electronic App
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | TRINSEO HK/8600-20-IC7800093 |
|---|---|---|---|
| Rockwell hardness | R-Scale,4.00mm | ISO 2039-2 | 123 |
| Mechanical properties | Test Condition | Test Method | TRINSEO HK/8600-20-IC7800093 |
|---|---|---|---|
| Flexural modulus | 4.00mm,InjectionMolded | ISO 178 | 2400 Mpa |
| bending strength | 4.00mm,InjectionMolded | ISO 178 | 94.0 Mpa |
| tensile strength | Yield,4.00mm,InjectionMolded | ISO 527-2/50 | 60.0 Mpa |
| 断裂,4.00mm,注塑 | ISO 527-2/50 | 58.0 Mpa | |
| Tensile strain | Yield,4.00mm,InjectionMolded | ISO 527-2/50 | 6.0 % |
| 断裂,4.00mm,注塑 | ISO 527-2/50 | 100 % |
| flammability | Test Condition | Test Method | TRINSEO HK/8600-20-IC7800093 |
|---|---|---|---|
| GWIT | 1.0mm | IEC 60695-2-13 | 960 °C |
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| Limiting Oxygen Index | ISO 4589-2 | 35 % |
| physical property | Test Condition | Test Method | TRINSEO HK/8600-20-IC7800093 |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.50-0.70 % | |
| melt mass-flow rate | 300°C/1.2kg | ISO 1133 | 20 g/10min |
| Thermal performance | Test Condition | Test Method | TRINSEO HK/8600-20-IC7800093 |
|---|---|---|---|
| Ball pressure temperature | IEC 60335-1 | >125 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 136 °C |
| vicat | -- | ISO 306/A120 | 150 °C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 122 °C |
| vicat | -- | ISO 306/B50 | 143 °C |
| Linear coefficient of thermal expansion | MD：-40到82°C | ASTM D696 | 6.5E-05 cm/cm/°C |
| RTI Imp | UL 746 | 125 °C | |
| RTI Str | UL 746 | 125 °C | |
| RTI Elec | UL 746 | 125 °C |
Contact Us
Get App
Top