Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS 730EM Kumho Sunny
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Kumho Sunny/730EM |
|---|---|---|---|
| density | 23℃ | ASTM D-792 | 1.04 g/cm |
| melt mass-flow rate | 220℃×10kg | ASTM D-238 | 16 g/10min |
| 200℃×21.6kg | ASTM D-238 | 24 g/10min | |
| 200℃×5kg | ASTM D-238 | 2.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Kumho Sunny/730EM |
|---|---|---|---|
| Impact strength of cantilever beam gap | 1/8in(3.2mm).23℃ | ASTM D-256 | 25 kg.cm/cm |
| elongation at break | 23℃ | ASTM D-638 | 25 % |
| bending strength | 23℃ | ASTM D-790 | 650 kg/cm |
| Rockwell hardness | ASTM D-785 | 108 R SCALE | |
| Flexural modulus | 23℃ | ASTM D-790 | 22000 kg/cm |
| tensile strength | 23℃ | ASTM D-638 | 480 kg/cm |
| Impact strength of cantilever beam gap | 1/4in(6.4mm).23℃ | ASTM D-256 | 23 kg.cm/cm |
| physical property | Test Condition | Test Method | Kumho Sunny/730EM |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.4～0.7 % |
| Thermal performance | Test Condition | Test Method | Kumho Sunny/730EM |
|---|---|---|---|
| vicat | ASTM D-1525 | 107(225) ℃(℉) | |
| Heat distortion temperature | 6.4mm18.6kg/cm，HDT | ASTM D-648 | 100(212) ℃(℉) |
Contact Us
Get App
Top