Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PUR，Unspecified Ebalta MG 709-20 / Comp. A+B Ebalta Kunststoff GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta MG 709-20 / Comp. A+B |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | 57to77 kJ/m² |
| hardness | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta MG 709-20 / Comp. A+B |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 7619 | 77to83 |
| Mechanical properties | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta MG 709-20 / Comp. A+B |
|---|---|---|---|
| Flexural modulus | ISO 178 | 2000to2300 MPa | |
| bending strength | ISO 178 | 63.0to73.0 MPa |
| Uncured Properties | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta MG 709-20 / Comp. A+B |
|---|---|---|---|
| Viscosity | 25°C | 0.35to0.55 Pa·s | |
| STORAGE STABILITY | 20°C | 15to20 min | |
| Curing Time | 20°C | 12to16 hr | |
| density | 20°C | 1.02to1.06 g/cm³ |
| thermosetting | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta MG 709-20 / Comp. A+B |
|---|---|---|---|
| Thermosetting components | 按重量计算的混合比 | 100 | |
| 硬化法 | 按重量计算的混合比:90 |
| Thermal performance | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta MG 709-20 / Comp. A+B |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 54.0to58.0 °C |
Contact Us
Get App
Top