Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 6M30 DOMO CHEM GERMANY
--
--
Mineral reinforcement、filler、Mineral filler、30%、Filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DOMO CHEM GERMANY/6M30 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 4.5 kJ/m² |
| hardness | Test Condition | Test Method | DOMO CHEM GERMANY/6M30 |
|---|---|---|---|
| Rockwell hardness | R级 | ISO 2039-2 | 115 |
| Mechanical properties | Test Condition | Test Method | DOMO CHEM GERMANY/6M30 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 4800 Mpa | |
| tensile strength | 断裂 | ISO 527-2/5 | 85.0 Mpa |
| Tensile strain | 断裂 | ISO 527-2/5 | 12 % |
| Electrical performance | Test Condition | Test Method | DOMO CHEM GERMANY/6M30 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| Surface Resistivity | IEC 60093 | 1E+13 ohms |
| flammability | Test Condition | Test Method | DOMO CHEM GERMANY/6M30 |
|---|---|---|---|
| burning rate | FMVSS302 | <100 mm/min | |
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| physical property | Test Condition | Test Method | DOMO CHEM GERMANY/6M30 |
|---|---|---|---|
| density | ISO 1183 | 1.36 g/cm³ | |
| Shrinkage rate | MD2：23°C,72小时 | ISO 2577 | 0.90-1.1 % |
| Thermal performance | Test Condition | Test Method | DOMO CHEM GERMANY/6M30 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 218to222 °C | |
| Hot deformation temperature (HDT) | 1.8MPa,未退火，HDT | ISO 75-2/A | 90.0 °C |
| vicat | ISO 306/B50 | 200 °C | |
| Hot deformation temperature (HDT) | 0.45MPa,未退火，HDT | ISO 75-2/B | 185 °C |
Contact Us
Get App
Top