Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 RC Plastics RCPA6 GF 30 RC Plastics, Inc. (Div. of LNP Engineering Plastics)
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RC Plastics, Inc. (Div. of LNP Engineering Plastics)/RC Plastics RCPA6 GF 30 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 910 J/m | |
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 48 J/m |
| Mechanical properties | Test Condition | Test Method | RC Plastics, Inc. (Div. of LNP Engineering Plastics)/RC Plastics RCPA6 GF 30 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.5 % |
| tensile strength | ASTM D638 | 143 MPa | |
| Flexural modulus | ASTM D790 | 7450 MPa | |
| coefficient of friction | 与自身-动态 | ASTM D1894 | 0.32 |
| bending strength | ASTM D790 | 211 MPa | |
| coefficient of friction | 与自身-静态 | ASTM D1894 | 0.26 |
| physical property | Test Condition | Test Method | RC Plastics, Inc. (Div. of LNP Engineering Plastics)/RC Plastics RCPA6 GF 30 |
|---|---|---|---|
| Water absorption rate | 平衡,23°C,50%RH | ASTM D570 | 1.1 % |
| density | ASTM D792 | 1.37 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.35to0.45 % |
| Thermal performance | Test Condition | Test Method | RC Plastics, Inc. (Div. of LNP Engineering Plastics)/RC Plastics RCPA6 GF 30 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 210 °C |
| melting temperature | 216 °C |
Contact Us
Get App
Top