Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 R533 ASCEND USA
Vydyne® 
--
--
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodASCEND USA/R533
Charpy Notched Impact Strength23°CISO 17911 kJ/m²
-30°CISO 17910 kJ/m²
Impact strength of cantilever beam gap23°CISO 18012 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 17970 kJ/m²
Impact strength of cantilever beam gap-30°CISO 18010 kJ/m²
Impact strength of simply supported beam without notch23°CISO 17980 kJ/m²
Mechanical propertiesTest ConditionTest MethodASCEND USA/R533
tensile strength 断裂, 23°CISO 527-2205 Mpa
Tensile strain断裂, 23°CISO 527-23.0 %
bending strength23°CISO 178290 Mpa
Flexural modulus23°CISO 17810200 Mpa
Tensile modulus23°CISO 527-210600 Mpa
Poisson's ratioISO 527-20.40
Electrical performanceTest ConditionTest MethodASCEND USA/R533
dielectric strength1.00 mmIEC 6024320 KV/mm
arc resistance3.00 mmASTM D495PLC 5
High arc combustion index (HAI)3.0 mmUL 746PLC 0
Hot wire ignition (HWI)0.75 mmUL 746PLC 4
High arc combustion index (HAI)0.75 mmUL 746PLC 0
Hot wire ignition (HWI)1.5 mmUL 746PLC 4
Volume resistivity3.00 mmIEC 600931.0E+14 ohms·cm
Compared to the Leakage Tracking Index (CTI)3.00 mmIEC 60112PLC 0
Hot wire ignition (HWI)3.0 mmUL 746PLC 3
High Voltage Arc Traceability Rate (HVTR)UL 746PLC 1
High arc combustion index (HAI)1.5 mmUL 746PLC 0
flammabilityTest ConditionTest MethodASCEND USA/R533
Hot filament ignition temperature1.5 mmIEC 60695-2-13725 °C
UL flame retardant rating3.0 mmUL 94HB
Burning wire flammability index0.75 mmIEC 60695-2-12750 °C
Hot filament ignition temperature3.0 mmIEC 60695-2-13750 °C
UL flame retardant rating0.75 mmUL 94HB
Burning wire flammability index3.0 mmIEC 60695-2-12800 °C
Hot filament ignition temperature0.75 mmIEC 60695-2-13775 °C
UL flame retardant rating1.5 mmUL 94HB
Burning wire flammability index1.5 mmIEC 60695-2-12725 °C
physical property Test ConditionTest MethodASCEND USA/R533
Water absorption rate平衡, 23°C, 50% RHISO 621.7 %
Shrinkage rate横向流量 : 23°C, 2.00 mmISO 294-40.90 %
流量 : 23°C, 2.00 mmISO 294-40.40 %
densityISO 11831.40 g/cm³
Water absorption rate24 hr, 23°CISO 620.80 %
Thermal performanceTest ConditionTest MethodASCEND USA/R533
RTI Elec0.75 mmUL 746120 °C
Heat distortion temperature1.8 MPa, 未退火，HDTISO 75-2/A250 °C
RTI0.75 mmUL 746125 °C
RTI Imp3.0 mmUL 746105 °C
RTI Elec1.5 mmUL 746120 °C
Linear coefficient of thermal expansion横向 : 23 到 55°C, 2.00 mmISO 11359-21.1E-4 cm/cm/°C
melting temperatureISO 11357-3260 °C
RTI Imp0.75 mmUL 746100 °C
Heat distortion temperature0.45 MPa, 未退火，HDTISO 75-2/B260 °C
Linear coefficient of thermal expansion流动 : 23 到 55°C, 2.00 mmISO 11359-22.1E-5 cm/cm/°C
RTI3.0 mmUL 746125 °C
RTI Elec3.0 mmUL 746120 °C
RTI Imp1.5 mmUL 746100 °C
RTI1.5 mmUL 746125 °C
injectionTest ConditionTest MethodASCEND USA/R533
drying time4.0 hr
Suggested maximum material return ratio50 %
Temperature in the middle of the barrel280 to 310 °C
Temperature at the rear of the barrel280 to 310 °C
Processing (melt) temperature285 to 305 °C
drying temperature80 °C
Temperature at the front of the material cylinder280 to 310 °C
Temperature65 to 95 °C
Spray nozzle temperature280 to 310 °C

Contact Us

Get App

Top