Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Hypro™ PP-HP 35 ENTEC USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ENTEC USA/Hypro™ PP-HP 35 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 27 J/m |
| Mechanical properties | Test Condition | Test Method | ENTEC USA/Hypro™ PP-HP 35 |
|---|---|---|---|
| Flexural modulus | 23°C | ASTM D790 | 1550 MPa |
| elongation | 屈服,23°C | ASTM D638 | 10 % |
| tensile strength | 屈服,23°C | ASTM D638 | 34.0 MPa |
| physical property | Test Condition | Test Method | ENTEC USA/Hypro™ PP-HP 35 |
|---|---|---|---|
| density | ASTM D1505 | 0.900 g/cm³ | |
| Shrinkage rate | MD | ASTM D955 | 1.2 % |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 35 g/10min |
| Thermal performance | Test Condition | Test Method | ENTEC USA/Hypro™ PP-HP 35 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 98.9 °C |
Contact Us
Get App
Top