Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PAR P-5001 UNICAR JAPAN
U-POLYMER
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | UNICAR JAPAN/P-5001 |
---|---|---|---|
Rockwell hardness | R-Scale | ASTM D785 | 120 |
thermal performance | Test Condition | Test Method | UNICAR JAPAN/P-5001 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 150 °C |
Linear coefficient of thermal expansion | MD | ASTM D696 | 6.3E-05 cm/cm/°C |
mechanical properties | Test Condition | Test Method | UNICAR JAPAN/P-5001 |
---|---|---|---|
Bending modulus | ASTM D790 | 2200 Mpa | |
bending strength | ASTM D790 | 86.0 Mpa | |
compressive strength | ASTM D695 | 76.0 Mpa | |
elongation | Break | ASTM D638 | 80 % |
tensile strength | ASTM D638 | 65.0 Mpa |
Electrical performance | Test Condition | Test Method | UNICAR JAPAN/P-5001 |
---|---|---|---|
Arc resistance | ASTM D495 | 125 sec | |
Dielectric constant | 1MHz | ASTM D150 | 3.00 |
Dielectric strength | ASTM D149 | 30 KV/mm | |
Dissipation factor | 1MHz | ASTM D150 | 0.010 |
Volume resistivity | ASTM D257 | 2E+16 ohms·cm |
Physical properties | Test Condition | Test Method | UNICAR JAPAN/P-5001 |
---|---|---|---|
Shrinkage rate | MD:3.00mm | ASTM D955 | 0.80 % |
Water absorption rate | 24hr,3.18mm | ASTM D570 | 0.25 % |
optical performance | Test Condition | Test Method | UNICAR JAPAN/P-5001 |
---|---|---|---|
transmissivity | 3000μm | ASTM D1003 | 88.0 % |