Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT 3706 GY7E428 SABIC INNOVATIVE SHANGHAI
VALOX™
Plastic bag,Electrical appliances,Construction field,Outdoor applications,Lighting applications,Electronic field,Electrical field
Impact modification
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/3706 GY7E428 |
|---|---|---|---|
| Hot deformation temperature | 1.8Mpa,Unannealed | ASTM D648 | 85 ℃ |
| 0.45 Mpa,Unannealed | ASTM D648 | 126 ℃ | |
| Linear coefficient of thermal expansion | -40℃to 40℃, xflow | ASTM E 831 | 8.64E-05 1/℃ |
| -40℃to 40℃, flow | ASTM E 831 | 7.92E-05 1/℃ | |
| melt mass-flow rate | 260°C/5.0 kgf | ASTM D1238 | 23 g/10min |
| Relative Heat Index (RTI) | Elec | UL 746B | ℃ |
| Mech w/o impact | UL 746B | ℃ | |
| Mech w/impact | UL 746B | 85 ℃ |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/3706 GY7E428 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 20300 kgf/cm | |
| Impact strength of cantilever beam gap | 23℃ | ASTM D256 | 68 cm-kgf/cm |
| Instrumented impact | 23℃ | ASTM D3763 | 506 ISO527-2/1 |
| tensile strength | Break | ASTM D638 | 400 kgf/cm |
| Yield | ASTM D638 | 490 kgf/cm |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/3706 GY7E428 |
|---|---|---|---|
| Compared to the Leakage Traceability Index (CTI) | UL 746A | PLC_2 | |
| High voltage arc tracing rate | UL 746A | PLC Code | |
| Hot wire ignition | UL 746A | ||
| UL flame retardant rating | UL 94 | 1.49 mm |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/3706 GY7E428 |
|---|---|---|---|
| Shrinkage rate | flow, 3.2 mm | % | SABIC Method 1.2 - 1.4 |
| xflow, 3.2 mm | % | SABIC Method 1.2 - 1.4 |