Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT HTI668FR NC010 DUPONT USA
Cristin®
Electronic and electrical components
Flame retardant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Other performance | Test Condition | Test Method | DUPONT USA/HTI668FR NC010 |
---|---|---|---|
Extreme Oxygen Index | ISO 4589-1 | 29 % |
thermal performance | Test Condition | Test Method | DUPONT USA/HTI668FR NC010 |
---|---|---|---|
Hot deformation temperature | 1.80 Mpa,Unannealed | ISO 75B-1 | 185 ℃ |
Linear coefficient of thermal expansion | 垂直Flow,23 to 55°C (73 to 130°F) | ISO 11359-1 | 0.000040 cm/cm/°C |
Melting temperature | ISO 3146 | 205 ℃ | |
UL flame retardant rating | UL94 | V-0 | |
1.50 mm | UL 94 | V-0 |
mechanical properties | Test Condition | Test Method | DUPONT USA/HTI668FR NC010 |
---|---|---|---|
bending strength | 23℃ | ISO 178 | 115 MPa |
Impact strength of cantilever beam gap | 23 ℃, Type 1, Notch A | ISO 180 | 3.7 KJ/m |
Impact strength of simply supported beam without notch | 23 ℃, Type 1, Edgewise | ISO 179 | 28 KJ/m |
-30 ℃, Type 1, Edgewise | ISO 179 | 22 KJ/m | |
Suspended wall beam without notch impact strength | 23 ℃, Type 1 | ISO 180 | 18 KJ/m |
Tensile creep modulus | 1h | ISO 899-1 | 5500 MPa |
1000h | ISO 899-1 | 4100 MPa | |
Tensile modulus | 23 ℃, 1.0 mm/min | ISO 527-1 | 6800 MPa |
Tensile strain | 23 °C, 5 mm/min,Break | ISO 527-1 | 2.1 % |
Tensile stress | 23 ℃, 5 mm/min,Break | ISO 527-1 | 77 MPa |
Physical properties | Test Condition | Test Method | DUPONT USA/HTI668FR NC010 |
---|---|---|---|
Shrinkage rate | Flow | ISO 294-4 | 0.5 % |
Across Flow | ISO 294-4 | 0.9 % | |
Water absorption rate | Sat/23C | ISO 62 | 0.5 % |
23C/59RH | ISO 62 | 0.2 % |