plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC MN-3705M TEIJIN JAPAN
PANLITE®
Lighting applications,Electrical components,Battery box
UV resistance,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodTEIJIN JAPAN/MN-3705M
Hot deformation temperature0.45MPaUnannealedISO 75-2/Bf108 °C
1.80MPaAnnealedISO 75-2/Af95 °C
Linear coefficient of thermal expansionTDISO 11359-27E-05 cm/cm/°C
MDISO 11359-27E-05 cm/cm/°C
flame retardant performanceTest ConditionTest MethodTEIJIN JAPAN/MN-3705M
Ignition temperature of heating wire2.00mmIEC 60695-2-12960 °C
Relative temperature of heating wire2.00mmIEC 60695-2-13825 °C
UL flame retardant ratingUL -94V-2 0.40mm
UL -94V-0 0.80mm
UL -94V-0 3.00mm
mechanical propertiesTest ConditionTest MethodTEIJIN JAPAN/MN-3705M
Bending modulus23°CISO 1782300 Mpa
bending strength23°CISO 17895 Mpa
Charpy Notched Impact Strength23°CISO 179/1eA50 kJ/m²
Elongation at Break23°CISO 527-2100 %
Yield,23°CISO 527-27.0 %
Impact strength of simply supported beam without notch23°CISO 179/1eUNB kJ/m²
Tensile modulus23°CISO 527-22450 Mpa
tensile strengthYield,23°CISO 527-260 Mpa
23°CISO 527-250 Mpa
Electrical performanceTest ConditionTest MethodTEIJIN JAPAN/MN-3705M
Surface resistivityIEC 60093>1.0E+15 Ω.cm
Physical propertiesTest ConditionTest MethodTEIJIN JAPAN/MN-3705M
melt mass-flow rate280℃/2.16KgISO 113327.0 cm3/10min
Shrinkage rateTD4.0mmISO 294-40.50-0.70 %
MD4.0mmISO 294-40.50-0.70 %
Water absorption rate(23°C,24hr)ISO 620.22 %