Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PFA 416HPX CHEMOURS US
TEFLON®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Supplementary Information | Test Condition | Test Method | CHEMOURS US/416HPX |
---|---|---|---|
critical shear rate | 372°C | 12.0 sec^-1 | |
MITFoldingEndurance | 200.0μm | ASTM D2176 | 4E+03 cycles |
hardness | Test Condition | Test Method | CHEMOURS US/416HPX |
---|---|---|---|
Shore hardness | ShoreD | ISO 868 | 55 |
ShoreD | ASTM D2240 | 55 |
thermal performance | Test Condition | Test Method | CHEMOURS US/416HPX |
---|---|---|---|
Melting temperature | ASTM D4591 | 305 °C |
mechanical properties | Test Condition | Test Method | CHEMOURS US/416HPX |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 690 Mpa |
23°C | ASTM D790 | 690 Mpa | |
elongation | Break,23°C | ASTM D3307 | 350 % |
Tensile strain | Break,23°C | ISO 12086 | 350 % |
tensile strength | Yield,23°C | ISO 12086 | 25.0 Mpa |
23°C | ASTM D3307 | 25.0 Mpa |
Electrical performance | Test Condition | Test Method | CHEMOURS US/416HPX |
---|---|---|---|
Dielectric constant | 1MHz | ASTM D150 | 2.03 |
1MHz | IEC 60250 | 2.03 | |
Dielectric strength | 0.250mm | IEC 60243-1 | 80 KV/mm |
0.250mm | ASTM D149 | 80 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | <2.0E-4 |
1MHz | ASTM D150 | <2.0E-4 | |
Volume resistivity | ASTM D257 | 1E+18 ohms·cm | |
ISO 1325 | 1E+18 ohms·cm |
Physical properties | Test Condition | Test Method | CHEMOURS US/416HPX |
---|---|---|---|
melt mass-flow rate | 372°C/5.0kg | ISO 12086 | 42 g/10min |
372°C/5.0kg | ASTM D3307 | 42 g/10min | |
Water absorption rate | 24hr | ASTM D570 | <0.030 % |
flammability | Test Condition | Test Method | CHEMOURS US/416HPX |
---|---|---|---|
Extreme Oxygen Index | ASTM D2863 | >95 % | |
ISO 4589-2 | >95 % | ||
UL flame retardant rating | UL 94 | V-0 |