Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
SMMA Generic Acrylic (SMMA) Generic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Test Condition | Test Method | Generic/Generic Acrylic (SMMA) | |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 16to34 J/m |
| elongation | 断裂,23°C | ASTM D638 | 2.1to21 % |
| bending strength | 23°C | ASTM D790 | 98.9to101 MPa |
| transmissivity | ASTM D1003 | 89.0to92.8 % | |
| Haze ratio | ASTM D1003 | 0.30to1.0 % | |
| Shrinkage rate | MD：23°C | ASTM D955 | 0.40to0.41 % |
| density | ASTM D792 | 1.04to1.09 g/cm³ | |
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 0.40to2.5 g/10min |
| Tensile modulus | 23°C | ASTM D638 | 2850to3450 MPa |
| Flexural modulus | 23°C | ASTM D790 | 1810to3380 MPa |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 67.2to92.2 °C |
| tensile strength | 屈服,23°C | ASTM D638 | 5.00to64.8 MPa |
| vicat | ASTM D1525 | 97.1to106 °C |
Contact Us
Get App
Top