Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT S650FR NC010 DUPONT USA
Cristin®
Electronic and electrical components
Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | DUPONT USA/S650FR NC010 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 160 °C |
1.8MPa,Unannealed | ISO 75-2/A | 65.0 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 1.2E-04 cm/cm/°C |
MD | ISO 11359-2 | 1.2E-04 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 221 °C | |
Vicat softening temperature | ISO 306/B50 | 175 °C |
mechanical properties | Test Condition | Test Method | DUPONT USA/S650FR NC010 |
---|---|---|---|
bending strength | ISO 178 | 100 Mpa | |
Nominal tensile fracture strain | ISO 527-2 | 7.2 % | |
Tensile creep modulus | 1hr | ISO 899-1 | 2500 Mpa |
1000hr | ISO 899-1 | 1800 Mpa | |
Tensile modulus | ISO 527-2 | 3000 Mpa | |
Tensile strain | Yield | ISO 527-2 | 4.6 % |
tensile strength | Yield | ISO 527-2 | 65.0 Mpa |
Electrical performance | Test Condition | Test Method | DUPONT USA/S650FR NC010 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 3 | |
Dielectric strength | IEC 60243-1 | 25 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 0.018 |
100Hz | IEC 60250 | 7.1E-04 | |
Relative permittivity | 100Hz | IEC 60250 | 3.40 |
1MHz | IEC 60250 | 3.50 | |
Surface resistivity | IEC 60093 | 1E+15 ohms | |
Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
Physical properties | Test Condition | Test Method | DUPONT USA/S650FR NC010 |
---|---|---|---|
Shrinkage rate | MD | ISO 294-4 | 1.8 % |
MD2 | ISO 294-4 | 2.2 % | |
TD2 | ISO 294-4 | 2.2 % | |
TD | ISO 294-4 | 1.6 % | |
Top out temperature | 170 °C | ||
Water absorption rate | Equilibrium,23°C,2.00mm,50%RH | ISO 62 | 0.15 % |
Saturation,23°C,2.00mm | ISO 62 | 0.39 % |
impact performance | Test Condition | Test Method | DUPONT USA/S650FR NC010 |
---|---|---|---|
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 65 kJ/m² |
23°C | ISO 179/1eU | 70 kJ/m² | |
Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 45 kJ/m² |
-30°C | ISO 180/1U | 42 kJ/m² |
flammability | Test Condition | Test Method | DUPONT USA/S650FR NC010 |
---|---|---|---|
Extreme Oxygen Index | ISO 4589-2 | 30 % | |
FMVSS flammability | FMVSS302 | DNI | |
UL flame retardant rating | 0.75mm | UL 94 | V-0 |
0.75mm | IEC 60695-11-10,-20 | V-0 | |
1.5mm | IEC 60695-11-10,-20 | V-0 | |
1.5mm | UL 94 | V-0 |